Snap-on launches Pro-Link+: Diagnostic system with OEM support for CV troubleshooting
The new Pro-Link+ from Snap-on delivers diagnostic coverage for Class 1-8 trucks, along with code-specific repair guidance in a handheld device.
Pro-Link+ combines hardware and software for a complete code-based diagnostic and repair platform for all makes of trucks, providing a direct path from pulling a fault code via the vehicle communication interface to diagnosing and fixing the problem. Code descriptions with step-by-step troubleshooting routines, testing procedures, component and connector photos, fault-specific wiring diagrams, specifications, and remove and install instructions are instantly available. Vehicles are back on the road without delays searching for repair information.
Snap-on said the vehicle communication interface has been validated by all major OEMs. It creates a reliable wireless or wired connection and supports the latest protocols, including CAN FD and DoIP. Both a 9-pin and a 16-pin adapter are included. At each connection, Pro-Link+ identifies all fitted systems on the vehicle, displays active and inactive fault codes, and automatically saves a vehicle health report.
See also: Akin: How to choose a fleet management solution
The Pro-Link+ hardware has been designed specifically for commercial vehicle service environments. It features a large 12-in. touchscreen, 9-hour battery life, and integrated camera with light. There is a USB-C port for charging and connection to a monitor or external devices and two USB 3.0 ports for peripherals. An internal microphone and stereo speakers are built in. The power-saving mode with a 5-second startup makes getting to work fast, and the open Windows system allows user-installed software, access to web browsers, and application multi-tasking.
A number of additional and advanced features are included:
- All-inclusive OEM-level software for all makes of trucks, engines, transmissions, and brakes
- Live data graphing, component failure testing, and replacement component programming
- Ability to adjust over 600 user-configurable parameters, such as cruise control, engine idle shutdown, and service intervals
- Over 200 OEM special tests, including DPF regens, cylinder cutouts, and fuel system leakage tests
“Effective diagnostic troubleshooting is often cited as the most significant challenge facing commercial vehicle technicians today," Maark Ganey, senior product manager, Snap-on Tools, said. “The Pro-Link+ is a complete diagnostic system designed to address this need. The proprietary hardware and software combine OEM-level diagnostic capabilities—hundreds of special tests and calibrations—with code-based repair information, including wiring diagrams and photos of component locations to make Pro-Link+ the essential diagnostic companion.”
