The Hunter RKHD heavy-duty power rack now includes longer approach ramps and a redesigned rub rail system to create more clearance for lower and longer vehicles.
The standard RKHD configuration is 24" high and includes a turnplate section, four runway sections, and a pop-up ramp per side. Runway sections can be added for greater wheelbase capacity. The RKHD can also be installed in shallow-pit configurations of 24" or 30" depths.
The strong truss design provides a 20,000-lb-per-axle capacity. Each leg of the RKHD bolts directly to the bay floor and can be adjusted for level accuracy.
Turnplate sections are recessed to accept optional turnplates and include adjustable front wheel stops to provide clearance during service operations. Runway sections are 33" wide, facilitating drive-on and drive-off without moving the runways. Inside rub-rails help prevent smaller vehicles from driving off the sides of the runways.
Pop-up ramps add wheelbase capacity while making maximum use of bay space. Back wheel stops automatically engage when ramps are raised to the up position. Ramp legs safely lock in the over-center position at maximum rise.
For additional information, phone Jim Huhn at 314-731-3020, ext 375.
